comparison
DPP Data Carriers: QR, NFC, RFID or Watermark?
The carrier is the last decision, not the first. How QR codes, NFC, RFID and digital watermarks compare for Digital Product Passports, and how to choose.
A data carrier is the physical link between a product and its passport. QR codes suit most products because they are free, universal and need no reader hardware. NFC suits high-value or harsh-environment goods. RFID suits bulk logistics. Digital watermarks suit packaging where surface space is scarce.
What this gives you
How to choose between QR, NFC, RFID and digital watermark for your product, with unit costs, durability and the failure mode each has in the field.
Key takeaways
- The carrier only encodes an identifier, so choosing it last and changing it later is cheap — provided identity was decided first.
- QR codes are the default for most product groups because they require no reader hardware and no unit cost.
- NFC and RFID cost per unit but survive contexts where a printed code cannot: abrasion, grease, laundering, or no line of sight.
- Durability across the whole product lifetime matters more than read speed, because the passport is most valuable at end-of-life.
The data carrier is the part of a Digital Product Passport everyone pictures first, and it should be decided close to last. It carries no data of its own — it encodes an identifier that resolves to the record. Get identity right and the carrier becomes a swappable detail; get it wrong and no carrier saves you.
That said, the choice is not arbitrary. A printed code on a workwear label that will be industrially laundered two hundred times is a decision with a predictable ending.
What does a carrier actually have to do?
- Data carrier
- The physical feature on or in a product that links it to its digital record — typically a QR code, NFC tag, RFID tag or digital watermark. Under the ESPR the carrier must be present on the product, its packaging or its documentation, and must remain readable for the product lifetime.
Three requirements matter, and they pull in different directions.
- Readable by the audiences who need it. A consumer has a phone. A recycler may have a phone, or an industrial scanner, or gloves and poor lighting.
- Durable for the product lifetime. The passport matters most at end-of-life, which is precisely when a printed label has had the longest to degrade.
- Economic at your volume. A cent per unit is nothing on a battery module and prohibitive on a garment care label.
How do the options compare?
| Carrier | Unit cost | Reader needed | Best for |
|---|---|---|---|
| QR code | Effectively zero | Any phone camera | Most product groups; the sensible default |
| NFC tag | Cents to tens of cents | NFC phone or reader | High value, harsh environments, anti-counterfeit |
| RFID tag | Cents upward | Dedicated reader | Bulk logistics, warehouse-scale reading |
| Digital watermark | Near zero once tooled | Compatible imaging | Packaging and sorting lines |
| Laser-etched code | Low, needs tooling | Any phone camera | Metal parts, no surface for a label |
The row that surprises people is the last column of the QR row. It is the default not because it is technically superior but because it removes a dependency: nobody needs to own anything to read it. For a passport whose whole point is to still work for a stranger in fifteen years, that property outweighs most technical advantages.
When is a QR code not enough?
Four situations genuinely justify the cost of something else.
The surface will not survive
Industrial laundering, abrasive environments, prolonged UV, grease and solvents all destroy printed codes. Workwear, tools and automotive components frequently fall here. An NFC tag sealed inside the product outlives the surface.
There is no line of sight
A battery module inside a sealed pack cannot present a visible code. NFC and RFID read through most non-metallic materials, which is why they dominate where the item is enclosed by design.
Counterfeiting is a real threat
A QR code is trivially copyable — that is inherent to a printed pattern. It authenticates nothing on its own. Where authentication matters, a cryptographically capable NFC tag that can prove it holds a secret is a materially different control.
Reading happens at industrial scale
A sorting facility processing thousands of items an hour cannot photograph each one. RFID reads in bulk without orientation, which is why waste and logistics operations favour it despite the reader infrastructure cost.
What should the carrier actually encode?
A resolvable URI, not a raw identifier and not a proprietary code. The standard here is GS1 Digital Link, which expresses a product identifier as a web address.
The practical consequence is that a phone camera resolves it with no special software, while a supply chain system can parse the same string for its GTIN and serial. One encoding, two entirely different consumers, no translation layer.
Choosing for your product group
The abstract comparison only gets you so far. These are the patterns that hold across the product groups currently heading for delegated acts.
| Product group | Usual choice | The deciding constraint |
|---|---|---|
| Batteries above 2 kWh | QR plus embedded identifier | Item-level serialisation and a sealed enclosure |
| Textiles and footwear | QR on a care label, or NFC | Laundering destroys printed labels over time |
| Electronics | QR or laser etch on the housing | Small surfaces, long service life, repair access |
| Iron and steel | Laser etch or stamped code | No surface will hold a label through processing |
| Furniture | QR on a permanent underside label | Long life, low unit cost tolerance |
| Packaging | Digital watermark or QR | Sorting lines read at speed, surface area is available |
Two of these deserve comment. Steel is the clearest case where a label is simply not an option — the material is cut, welded and coated, so identity has to be marked into the metal or carried in accompanying data rather than on the surface. Textiles are the case where the durability question is most often underestimated, because a care label that survives twenty domestic washes may not survive two hundred industrial ones.
Placement and durability
The ESPR permits the carrier on the product, its packaging or its documentation. For circularity purposes the product itself is almost always the right answer, because packaging and documentation are discarded long before the product reaches end-of-life — which is exactly when the passport is needed.
| Placement | Survives until | Suitable when |
|---|---|---|
| On the product itself | End of life | Almost always preferred |
| On a permanent internal component | End of life, needs disassembly | Surface is unsuitable or aesthetic |
| On packaging | Unboxing | Packaging is itself the regulated product |
| On documentation | First misplacement | Last resort only |
Test durability against the actual product life, not a laboratory abrasion cycle. If the item is expected to last fifteen years outdoors, the honest question is whether the code will be readable in year fourteen by someone deciding whether to repair or discard it.
Frequently asked questions
Does the ESPR mandate a specific data carrier?
No. The framework requires that a passport be accessible through a data carrier, and leaves the specific technology to each delegated act and to the manufacturer. Some acts may be more prescriptive for their product group, but the framework itself is deliberately technology-neutral to avoid freezing an implementation choice into law.
Can I change the carrier after products are already on the market?
You can change it for future production freely, because the carrier only encodes an identifier. Products already sold keep whatever carrier they shipped with, so your resolver must continue serving the old encoding indefinitely. This is a strong argument for using a standard scheme rather than a proprietary one.
How much data can a QR code hold?
Several kilobytes in principle, but the relevant answer is that it should hold only a URI of perhaps sixty characters. Larger payloads produce dense codes that scan poorly on damaged or curved surfaces, and they freeze data at printing time, which defeats the purpose of a live record.
Are NFC tags worth the cost for consumer goods?
Usually not on cost alone. They become worthwhile when authentication matters, when the surface cannot carry a durable printed code, or when the consumer experience of tapping rather than scanning drives measurable engagement. For most product groups a QR code plus a well-designed landing experience achieves the same outcome.
What happens if the carrier is damaged or removed?
The passport still exists and remains reachable by its identifier through other routes, such as a serial number printed elsewhere or a lookup by model and batch. Designing a fallback path matters, because a passport reachable only through a single physical feature fails exactly when that feature degrades.
Do digital watermarks work for products as well as packaging?
They work best on printed surfaces with sufficient area, which makes packaging the natural fit, and sorting lines the natural reader. On products with small or unprinted surfaces there is nowhere to carry the watermark, so a physical code or embedded tag remains necessary.
Sources
- Regulation (EU) 2024/1781 establishing a framework for ecodesign requirements — EUR-Lex, European Union, 2024-06
- GS1 Digital Link standard — GS1, 2024
- Regulation (EU) 2023/1542 concerning batteries and waste batteries — EUR-Lex, European Union, 2023-07
Continue reading
- GS1 Digital Link explainedThe standard that turns a product identifier into a resolvable web address.
- How to create a Digital Product PassportWhere the carrier decision sits in the six implementation steps.
- デジタル製品パスポートとは何ですか。The record the carrier resolves to, and who is allowed to see what.
- QR codes and product identityHow CirculeID generates and resolves passport carriers at scale.